Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Open the hood.
- Remove the headlamp motor/actuator cover from the knob.
- Rotate the headlamp motor/actuator manual control knob counterclockwise to raise the headlamp.
- Disconnect the headlamp wiring harness electrical connector from the forward lamp wiring harness.
- Remove the headlamp bezel. Refer to Headlamp Bezel Replacement .
- Reach through the opening between the headlamp assembly and the frame rail to access the headlamp bulb/socket.
- Rotate the headlamp bulb/socket counterclockwise to remove it from the headlamp capsule.
- Disconnect the electrical connector from the headlamp bulb/socket.
CAUTION:
Refer to Halogen Bulb Caution in Cautions and Notices.