LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Lighting Systems) >> Repair Instructions >> Marker Lamp Replacement - Side >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Sidemarker Lamp Socket To Sidemarker Lamp
    GM64664Courtesy of GENERAL MOTORS CORP.
  1. Position the sidemarker lamp to the fender.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the sidemarker lamp retaining nuts.

    Tighten:  Tighten the rear sidemarker lamp retaining nuts to 2 N.m (18 lb in).

  4. Install the socket to the sidemarker lamp assembly.
  5. Install the nuts attaching the radio antenna, if removed.

    Tighten:  Tighten the antenna bracket retaining nuts to 12 N.m (106 lb in).

  6. Install the tail lamp. Refer to Tail Lamp Replacement .