LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Rear Suspension System) >> Repair Instructions >> Spring Bolt And Insulators Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the rear transverse spring to the lower control arms.
  2. Install the transverse spring bolts (2), insulators and nuts. See Figure.
  3. Release and remove J 33432-A from the transverse spring. See Figure.
  4. Set the transverse spring stud height (1) to the height measured during removal. See Figure.
  5. Install the retainers to the bolts.
  6. Install the tire and wheel assembly. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in TIRES AND WHEELS article.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals