Section 76 (Manual Transmission Clutches): Specifications

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fastener Tightening Specifications

Application

Specification

Metric

English

Clutch Actuator Cylinder Mounting Bolts

12 N.m

106 lb in

Clutch Pedal Bracket Mounting Nuts

27 N.m

20 lb ft

Clutch Pedal Nut

50 N.m

37 lb ft

Clutch Pressure Plate Bolts⁽¹⁾

63 N.m

47 lb ft

Cruise Control Release Switch Bracket Retaining Bolts

12 N.m

106 lb in

Driver Foot Rest Bracket Retaining Bolt

8 N.m

71 lb in

Driver Foot Rest Bracket Retaining Nut

10 N.m

89 lb in

Engine Flywheel Inspection Cover Retaining Bolts

25 N.m

18 lb ft

Negative Battery Cable Bolt

15 N.m

11 lb ft

⁽¹⁾	Clutch pressure plate bolts must be tightened in sequence and in even increments over three passes, then tightened to final specification on the fourth pass.

Fig 1: Sealers & Lubricants

Courtesy of GENERAL MOTORS CORP.