Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear coil springs.
- Raise the rear axle.
- Install the shock absorber lower mounting bolts.
Tighten: Tighten the shock absorber lower mounting bolts to 80 N.m (59 lb ft).
- Remove the rear axle support.
- Lower the vehicle
NOTE:
Refer to Fastener Notice
in Cautions and Notices.