LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Door System, Mirror System & Window System) >> Repair Instructions >> Handle Lock Rod Guide Block Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Locate the opening in the retaining guide block (1).
  1. Install the inside handle rod to the retaining guide block (1), push inward to secure the rod.
  2. Fig 1: Retaining Guide Block & Rod
    GM794020Courtesy of GENERAL MOTORS CORP.
  3. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Impala)  or Trim Panel Replacement - Side Front Door (Monte Carlo) , or install the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door .