LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Door System, Mirror System & Window System) >> Repair Instructions >> Handle Lock Rod Guide Block Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. This procedure covers the removal and installation of the front and rear door.

    Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Impala)  or Trim Panel Replacement - Side Front Door (Monte Carlo) , or remove the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door .

  2. Remove the retaining guide block (1).

    Pull the rod (2) upward until it releases from the retaining guide block.

    3. Fig 1: Retaining Guide Block & Rod
    GM794020Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals