Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Install the air cleaner intake duct to the throttle body.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the air cleaner intake duct to the air cleaner cover.
Tighten: Tighten the air cleaner duct clamp to 2 N.m (18 lb in).
Install the IAT sensor.
Connect the IAT sensor electrical connector (3).

Fig 1: Connecting IAT Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.