Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 5 .
- Remove the instrument panel (I/P) compartment. Refer to Compartment Replacement - Instrument Panel (I/P)
in Instrument Panel, Gages, and Console.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the inflator module connector.
- Remove the I/P nuts from the inflator restraint module.
- Remove the inflatable restraint module (1) from the I/P.
- Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping .