Installation Procedure

Fig 1: Instrument Panel (I/P) Multifunction Switch Assembly Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Fig 2: Instrument Panel (I/P) Multifunction Switch Assembly

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolts to the switch assembly of the rear object alarm module.
Tighten: Tighten the bolts to 2 N.m (18 lb in)

Fig 3: View Of Front Floor Console

Courtesy of GENERAL MOTORS CORP.

Install the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (Aztek) .
Install the front floor console. Refer to Trim Plate Replacement - Front Floor Console (Aztek) or Trim Plate Replacement - Front Floor Console (Rendezvous) .