Removal Procedure
- Raise the window assembly.
- Remove the inside door handle assembly, if required. Refer to Door Handle Replacement - Inside .
- Remove the door trim panel. Refer to Trim Panel Replacement - Door .
- Remove the 3 door brackets (1) from the door inner panel (3) by levering out the center pin of the bracket.
- Carefully, peel off the door water shield (2) upwards to gain access to the window guide.
Courtesy of GENERAL MOTORS CORP.
- Remove the 2 screws (1) securing the window guide (2)
- Remove the window guide (2) through the opening in the door inner panel.
Courtesy of GENERAL MOTORS CORP.