LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> GTO Standard >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Engine Protection Shield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install engine protection shield, and secure with the four engine protection shield bolts (1).

    Tighten:  Tighten the engine protection shield bolts to 30 N.m (22 lb ft).

  2. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    3. Fig 1: View Of Engine Protection Shield Bolts
    GM1302128Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals