Removal Procedure
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
- Remove the drive belt from the generator. Refer to Drive Belt Replacement (L26) or Drive Belt Replacement (L32) in Engine Mechanical - 3.8L.
- Remove the generator rear brace. Refer to Generator Brace Replacement (L26) or Generator Brace Replacement (L32) .
- Remove the bolts (1, 3) and the stud (2) from the generator.
- Disconnect the electrical connector from the generator.
- Position aside the protective boot from the generator output BAT terminal for access.
- Remove the generator output BAT terminal nut and remove the positive battery lead from the generator.
- Remove the generator.