LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Sunfire Standard >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular Communication System >> Repair Instructions >> Bracket Assembly Replacement - OnStar Module >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the bracket assembly (1) to the hinge pillar stud (3), and the dash pan stud (4).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the retaining nut (2) to the hinge pillar stud (3).

    Tighten:  Tighten nut to 9.5 N.m (84 lb in).

  3. Install the retaining nut (2) to the dash pan stud (4).

    Tighten:  Tighten nut to 9.5 N.m (84 lb in).

  4. Install the OnStar® module to the bracket assembly. Refer to Communication Interface Module Replacement .
  5. Reposition the carpet and the floor sound deadener to a desired appearance, if necessary. Refer to Carpet Replacement - Front in Interior Trim.
    Fig 1: Installing Bracket Assembly Retaining Nuts
    GM865097Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals