Installation Procedure
- Position the rear run channel (1) in the front door.
- Lift up the rear channel to install the top clip.
- Install the window rear channel bolt (2).
Tighten: Tighten the lower window channel bolt 6 N.m (53 lb in).
- Install the reveal molding.
- Install the front door window. Refer to Window Replacement - Front Door .
- Install the front door water deflector. Refer to Water Deflector Replacement - Front Door .
- Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Pontiac) or Trim Panel Replacement - Side Front Door (Chevrolet) .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.