Removal Procedure

WARNING: This page is about a different car, the 2005 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Remove the LH front seat. Refer to Seat Replacement - Front Bucket in Seats.

Fig 1: Deceleration Sensor Bracket And Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the bolt (1) and the yaw rate sensor bracket (2).
Disconnect the yaw rate sensor electrical connector.

Fig 2: Deceleration Sensor And Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the 2 bolts (1) that retain the yaw rate sensor (2).
Remove the yaw rate sensor (2) from the vehicle.