LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Cellular Communication System) >> Repair Instructions >> Bracket Assembly Replacement - OnStar Module >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull back enough of the carpet and the floor sound deadener for more access, if necessary. Refer to Carpet Replacement - Front in Interior Trim.
  2. Remove the OnStar® module from the bracket assembly. Refer to Communication Interface Module Replacement .
  3. Remove the retaining nut (2) from the dash pan stud (4).
  4. Remove the retaining nut (2) from the hinge pillar stud (3).
  5. Remove the bracket assembly (1) from the hinge pillar stud, and the dash pan stud.
    Fig 1: Removing Bracket Assembly Retaining Nuts
    GM865097Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals