LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Controls - 3.6L - Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Aligning Fuel Level Sensor
    GM1404543Courtesy of GENERAL MOTORS CORP.
  1. Slide the fuel level sensor up in order to install the fuel level sensor to the fuel sender module.
  2. Ensure that the fuel level sensor retainer is properly engaged.
    3. Fig 2: View Of Fuel Level Sensor Electrical Connector
    GM1404537Courtesy of GENERAL MOTORS CORP.
  3. Connect the fuel level sensor electrical connector.
  4. Install the fuel sender to the fuel tank. Refer to Fuel Tank Module Replacement .
scientia non olet · About LEMON Manuals