Removal Procedure

WARNING: This page is about a different car, the 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Remove the fuel sender from the fuel tank. Refer to Fuel Tank Module Replacement .

Fig 1: View Of Fuel Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the fuel level sensor electrical connector located in the module cover.
Use a small flat-bladed tool in order to disengage the fuel level sensor retainer.

Fig 2: Aligning Fuel Level Sensor

Courtesy of GENERAL MOTORS CORP.

Slide the fuel level sensor down in order to remove the fuel level sensor from the fuel sender module.