Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Cap the fittings and plug the holes when servicing the fuel system in order to prevent dirt and other contaminants from entering the open pipes and passages.

IMPORTANT: Always maintain cleanliness when servicing fuel system components.

Drain the fuel tank. Refer to Fuel Tank Draining Procedure .
Remove the fuel filler cap.
Remove the fuel filler pipe screws from the fuel filler pocket.

Fig 1: Removing Fuel Filler Pipe Screws

Courtesy of GENERAL MOTORS CORP.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Loosen the fuel filler hose clamp (1) at the fuel filler pipe (2).

Fig 2: Identifying Fuel Tank Components

Courtesy of GENERAL MOTORS CORP.

Remove the fuel filler pipe screw from the under body.
Remove the fuel filler pipe from the fuel tank hose and the vehicle.

Fig 3: Removing Fuel Filler Pipe

Courtesy of GENERAL MOTORS CORP.