Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Install the spark plug wires to the engine.
Install the spark plug wires to the ignition coils.

Fig 1: Identifying Spark Plug Wire Location On Ignition Coils

Courtesy of GENERAL MOTORS CORP.

Install the spark plug wires 1, 3, and 5 to the engine right side spark plugs.
Install the spark plug wires to the retaining clip.

Fig 2: Installing Spark Plug Wires To Spark Plugs

Courtesy of GENERAL MOTORS CORP.

Install the spark plug wires 2, 4, and 6 to the engine left side spark plugs.
Install the spark plug wires to the retaining clips.

Fig 3: Identifying Spark Plug Wire Routing

Courtesy of GENERAL MOTORS CORP.