LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Seat System) >> Repair Instructions >> Heated Seat Control Module Replacement - Front >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat to the full-up position.
  2. Remove the bolts that secure the front seat frame to the floor.
  3. Rotate the seat forward to access the heater module.
  4. Disconnect the seat electrical harness connector.
  5. Disconnect the heater control module from the seat frame by sliding the control module toward the front of the seat.
  6. Disconnect the electrical harness connector (1) from the heater module (2).
    7. Fig 1: Electrical Harness Connector & Heater Module
    GM816209Courtesy of GENERAL MOTORS CORP.
  7. Remove the heater module from the front seat.
scientia non olet · About LEMON Manuals