Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Position the pull handle to the door trim panel.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the pull handle housing screws.
Tighten: Tighten the screws to 3 N.m (27 lb in).

Fig 1: Door Trim Panel & Pull Handle Housing Screws (Front & Rear Door)

Courtesy of GENERAL MOTORS CORP.

Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door and to Trim Panel Replacement - Side Rear Door .