LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Seat System) >> Repair Instructions >> Seat Back Panel Replacement - Front >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the handle on the panel and install the cable anchors.
    2. Fig 1: Front Seat Handle & Trim Handle
    GM859252Courtesy of GENERAL MOTORS CORP.
  2. Install the cable guides and the handle.
    3. Fig 2: Cable Guides & Handle Back (Front Seat)
    GM859293Courtesy of GENERAL MOTORS CORP.
  3. Engage the retainer at the top of the panel.
  4. Engage the locator tab (1) in the seat back
    5. Fig 3: Panel Bottom & Locator Tab (Front Seat)
    GM859239Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the screws that secures the seat back trim panel.

    Tighten:  Tighten the screws to 3 N.m (27 lb in).

    6. Fig 4: View Of Cargo Net
    GM859297Courtesy of GENERAL MOTORS CORP.
  6. Install the cargo net.
scientia non olet · About LEMON Manuals