LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (HVAC Systems - Manual) >> Repair Instructions >> HVAC Control Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory in Instrument Panel, Gages and Console.
  2. Remove the I/P center compartment. Refer to Compartment Replacement - Instrument Panel (I/P) - Center in Instrument Panel, Gauges, and Console.
  3. Fig 1: Retaining Screws & HVAC Control Module
    GM1206074Courtesy of GENERAL MOTORS CORP.
  4. Remove the retaining screws (1) from the HVAC control module.
  5. Pull the HVAC control module out from the I/P.
  6. Disconnect the electrical connectors from the HVAC control module.
  7. Remove the HVAC control module.