LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Bonneville SLE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.8L - Introduction >> Repair Instructions >> Mass Air Flow (MAF) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Removing/Installing Mass Air Flow (MAF) Sensor
    GM378168Courtesy of GENERAL MOTORS CORP.
  1. Install the MAF sensor (1) to the throttle body.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws (9) that hold the MAF sensor to the throttle body.

    Tighten:  Tighten the screws to 3 N.m (27 lb in).

  3. Connect the MAF sensor electrical connector (8) to the MAF sensor (1).
  4. Install the fuel injection sight shield. Refer to Fuel Injector Sight Shield Replacement .
scientia non olet · About LEMON Manuals