Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Video Display

Courtesy of GENERAL MOTORS CORP.

Install the video display.
Install the video display wire harness connector.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the video display hinge screws.
Tighten: Tighten the screws to 1 N.m (10 lb in).
Install the hinge cover. Refer to Trim Plate Replacement - Console Rear (UK6) or Trim Plate Replacement - Console Rear (U32) in Instrument Panel, Gages and Console.