Window Motor Programming and Setup
WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
When replacing a window motor in the front or the rear doors the new motor must be programmed using the Tech 2
Follow the procedure below to program power window motors.
- Install Tech 2 and CANDI module
- Select proper year, make and modle of vehicle
- Select Body and Accessories
- Select Doors
- Select Special Functions
- Select Drivers Door Switch or Passenger Door Switch depending on which window motor you are trying to program
- Select Power Window Motor Programming and follow on tool instructions