Removal Procedure
WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Open the rear compartment.
- Open the right rear compartment storage bin.
- Remove the carpet from within the bin.
- Remove the communication interface module nuts.
- Disconnect the mobile telephone antenna cable from the communication interface module by pulling outward on the square plastic housing.
- Disconnect the electrical connectors.
- Disconnect the navigation antenna coaxial antenna cable from the module.
- Remove the communication interface module from the vehicle.
IMPORTANT:
The vehicle communication interface module (VCIM) has a specific set of unique numbers that tie the module to each vehicle. These numbers, the 10-digit station identification and the 11-digit electronic serial number, are used by the National Cellular Network and OnStar® to identify the specific vehicle. Because these numbers are tied to the vehicle identification number of the vehicle, you must never exchange these parts with those of another vehicle.