Installation Procedure
- Install the run channel weather-strip (3) to the front door window.
- Install the push-in retainer (2) at the top of the channel.
- Install the channel lower bolt (4).
Tighten: Tighten the front door window front run channel lower bolt to 10 N.m (89 lb in).
- Install the front door rear view mirror. Refer to Mirror Replacement .
- Install the front door window. Refer to Window Replacement - Front Door .
- Install the front door water deflector. Refer to Water Deflector Replacement - Front Door .
- Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door .
NOTE:
Refer to Fastener Notice in Cautions and Notices.