LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Grand Am SC/T >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Accelerator Controls Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Turn OFF the ignition.
    2. Fig 1: Removing/Installing Accelerator Cable & Components
    GM12287Courtesy of GENERAL MOTORS CORP.
  2. Remove the left instrument panel sound insulator. Refer to Closeout/Insulator Panel Replacement - Left (Outboard) or Closeout/Insulator Panel Replacement - Left (Inboard) in Instrument Panel, Gauges, and Console.
  3. Disconnect the accelerator cable (5) from the accelerator pedal (1).
  4. Squeeze the accelerator cable cover tangs and push the accelerator cable through the bulkhead.
    5. Fig 2: Identifying Throttle Cable Bracket With Cables
    GM12735Courtesy of GENERAL MOTORS CORP.
  5. Remove the accelerator cable shield, if equipped.
  6. Disconnect the accelerator cable from the retaining clip.
  7. Disconnect the accelerator cable from the throttle body lever.
  8. Disconnect the cruise control cable from the accelerator cable bracket.
  9. Disconnect the accelerator cable from the accelerator cable bracket.
    10. Fig 3: Identifying Accelerator Cables
    GM12734Courtesy of GENERAL MOTORS CORP.
  10. Remove the accelerator cable from the vehicle noting cable routing.
scientia non olet · About LEMON Manuals