Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Position the sensor to the vehicle.
- Connect the electrical connector to the sensor.
- Install the outside air temperature sensor to the radiator air baffle.
Courtesy of GENERAL MOTORS CORP.
- Position the hood latch closeout panel to the vehicle.
Courtesy of GENERAL MOTORS CORP.
- Install the push-in retainers (1) to the hood latch closeout panel.
- Close the hood.
- Drive the vehicle at a speed of 32 km/h (20 mph) for approximately one and a half minutes or at a speed of 72 km/h (45 mph) for approximately one minute in order to obtain the outside air update.