Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Hold Down Bolt (L26/L32) | 18 N.m | 13 lb ft |
| Battery Retainer Bolt (LS4) | 18 N.m | 13 lb ft |
| Battery Side Terminal Adapter | 15 N.m | 11 lb ft |
| Battery Tray Bolt | 5 N.m | 44 lb in |
| Generator Bolt/Stud | 50 N.m | 37 lb ft |
| Generator Bracket Bolt (LS4) | 50 N.m | 37 lb ft |
| Generator Output BAT Terminal Nut | 20 N.m | 15 lb ft |
| Generator Rear Brace Bolt/Nut (L26/L32) | 50 N.m | 37 lb ft |
| Generator Rear Bracket Bolt | 50 N.m | 37 lb ft |
| Ground Wire Bolt | 10 N.m | 89 lb in |
| Negative Battery Terminal Bolt | 15 N.m | 11 lb ft |
| Positive Battery Cable Junction Block Lead Nut | 10 N.m | 89 lb in |
| Positive Battery Terminal Bolt | 15 N.m | 11 lb ft |
| Starter Bolt | 43 N.m | 32 lb ft |
| Starter Solenoid BAT Terminal Nut | 10 N.m | 89 lb in |
| Starter Solenoid S Terminal Nut (L26/L32) | 2.3 N.m | 20 lb in |
| Transaxle Stud Nut | 30 N.m | 22 lb ft |