LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Pursuit Base, Standard >> Repair and Diagnosis >> Brakes >> Antilock Brake System And Traction Control System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

NOTE: Always connect or disconnect the wiring harness connector from the EBCM/EBTCM with the ignition switch in the OFF position. Failure to observe this precaution could result in damage to the EBCM/EBTCM.
  1. Turn the ignition switch to the OFF position.
  2. If equipped with RPO LSJ, remove the throttle body air snorkel.
  3. Clean the electronic brake control module (EBCM) (3) to brake pressure modulator valve (BPMV) (4) area of any accumulated dirt and foreign material.
  4. Disconnect the electrical connector (1) from the EBCM (3).
  5. Remove the 4 EBCM-to-BPMV retaining bolts (2).
    6. IMPORTANT: Do Not use a metal tool to pry the EBCM from the BPMV. Use care to ensure that the EBCM-to-BPMV mating surfaces are not scratched during EBCM removal.
  6. Separate the EBCM (3) from the BPMV (4) by carefully pulling apart.
scientia non olet · About LEMON Manuals