LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Sunfire Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Introduction & Repair Instructions >> Repair Instructions >> Floor Shift Control Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
    2. Fig 1: Identifying Automatic Transmission Control Lever Handle Retainer
    GM104490Courtesy of GENERAL MOTORS CORP.
  2. Remove the automatic transmission control lever handle retainer.
  3. Remove the automatic transmission control lever handle.
  4. Remove the console. Refer to Console Replacement - Front Floor in Instrument Panel, Gauges and Console.
    5. Fig 2: View Of Range Select Lever Cable
    GM104480Courtesy of GENERAL MOTORS CORP.
  5. Remove the range select lever cable from the automatic transmission control.
  6. Position aside the park lock cable. Refer to Park Lock Cable Replacement 
  7. Remove the electrical connector.
    8. Fig 3: View Of Transmission Shift Control Assembly
    GM104495Courtesy of GENERAL MOTORS CORP.
  8. Remove the automatic transmission control nuts.
  9. Remove the automatic transmission control.
scientia non olet · About LEMON Manuals