Removal Procedure

Fig 1: Removing Accessory Switch Mounting Plate

Courtesy of GENERAL MOTORS CORP.

Using a taped flat bladed tool, gently pry up on the front of the side door accessory switch mounting plate (1), and slide forward from the front side door trim (2).

Fig 2: Window/Lock Switch Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Fig 3: Window/Lock Switch Components

Courtesy of GENERAL MOTORS CORP.

Remove the following components from the front side door window/lock switch (3):
- The 3 screws (1)
- The front side door accessory switch mounting plate (2)