LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Vibe Base, AWD >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Brake Modulator Assembly Replacement (With VSC) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: EBCM Harness Connector Lock Lever
    GM1470018Courtesy of GENERAL MOTORS CORP.
  1. Release the electronic brake control module (EBCM) harness connector lock lever (1).
  2. Disconnect the EBCM harness connector (2).
    3. Fig 2: Brake Modulator Assembly
    GM1470016Courtesy of GENERAL MOTORS CORP.
  3. Remove the 6 brake pipes from the brake modulator assembly (1).
  4. Plug the brake pipes in order to prevent loss or contamination of brake fluid.
  5. Remove the 2 bolts (2) from the brake pressure modulator bracket (3).
    6. Fig 3: Brake Modulator Nut
    GM819497Courtesy of GENERAL MOTORS CORP.
  6. Remove the nut (1) and the brake pressure modulator assembly and bracket.
  7. Remove the 2 nuts and the brake pressure modulator assembly from the bracket.
scientia non olet · About LEMON Manuals