PCM Reprogramming

If the PCM needs to be reprogrammed, refer to Service Programming System (SPS) .

• If the PCM needs to be reprogrammed, refer to Service Programming System (SPS) .
• Engine Oil Life Remaining-When available, use a scan tool to reset the Engine Oil Life Remaining back to the original percentage recorded before the module was reprogrammed.
IMPORTANT: After programming, perform the following to avoid future misdiagnosis:
• Turn the ignition OFF for 30 seconds.
• Turn the ignition ON with the engine OFF.
• Use the scan tool in order to retrieve history DTCs from all modules.
• Clear all history DTCs.