Engine Control System - 2.4L - DTC P0010 To DTC P0341

• DTC P0010, P0011, P0013 or P0014
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC P0010 and P0013
  • Conditions for Running the DTC P0011 and P0014
  • Conditions for Setting the DTC P0010 and P0013
  • Conditions for Setting the DTC P0011 and P0014
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
  • Repair Verification
• DTC P0016
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0017
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0030, P0036, P0053, P0054, P0135 or P0141
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
    • Notes
    • P0030 or P0036
    • P0053 or P0054
    • P0135 or P0141
  • Conditions for Running the DTC
    • P0030 or P0036
    • P0053 or P0054
    • P0135 Heater Current Test
    • P0135 Heater Resistance Test
    • P0141 Heater Current Test
    • P0141 Heater Resistance Test
  • Conditions for Setting the DTC
    • P0030 or P0036
    • P0053 or P0054
    • P0135 Heater Current Test
    • P0135 Heater Resistance Test
    • P0141 Heater Current Test
    • P0141 Heater Resistance Test
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0068 or P0121
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Testing
  • Repair Procedures
  • Repair Verification
• DTC P0101 or P1101
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
    • Special Tools Required
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0102 or P0103
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
    • DTC P0102
    • DTC P0103
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
    • Special Tools Required
  • Circuit/System Verification
  • Circuit/System Testing
    • DTC P0102
    • DTC P0103
  • Component Testing
  • Repair Procedures
• DTC P0106
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0107 or P0108
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTC
    • DTC P0107
    • DTC P0108
  • Conditions for Setting the DTC
    • DTC P0107
    • DTC P0108
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0112 or P0113
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
  • Conditions for Running the DTC
    • DTC P0112
    • DTC P0113
  • Conditions for Setting the DTC
    • DTC P0112
    • DTC P0113
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
    • DTC P0112
    • DTC P0113
  • Component Testing
  • Repair Procedures
• DTC P0116
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0117 or P0118
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
  • Conditions for Running the DTC
    • DTC P0117
    • DTC P0118
  • Conditions for Setting the DTC
    • DTC P0117
    • DTC P0118
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
    • DTC P0117
    • DTC P0118
  • Component Testing
  • Repair Procedures
• DTC P0120, P0122, P0123, P0220, P0222, P0223 or P2135
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
  • Conditions for Running DTC P0120, P0122, P0123, P0220, P0222, P0223
  • Conditions for Running DTC P2135
  • Conditions for Setting DTC P0120
  • Conditions for Setting DTC P0122
  • Conditions for Setting DTC P0123
  • Conditions for Setting DTC P0220
  • Conditions for Setting DTC P0222
  • Conditions for Setting DTC P0223
  • Conditions for Setting DTC P2135
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Circuit/System Testing for DTC P2135 only
  • Repair Procedures
• DTC P0125 or P0128
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
    • DTC P0125
    • DTC P0128
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0131, P0132, P0137, P0138, P2A00 or P2A01
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
    • Notes
    • P2A01
  • Conditions for Running the DTC
    • P0131 Lean Test Enable
    • P0131 Power Enrichment Test Enable
    • P0132 Rich Test Enable
    • P0132 Decel Fuel Cutoff Test Enable
    • P0137 Lean Test Enable
    • Power Enrichment Test Enable
    • P0138 Rich Test Enable
    • P0138 Decel Fuel Cutoff Test Enable
    • P2A00
    • P2A01 Passive Test
    • P2A01 Intrusive Test
  • Conditions for Setting the DTC
    • P0131 Lean Test
    • P0131 Power Enrichment Test
    • P0132 Rich Test
    • P0132 Decel Fuel Cutoff Test
    • P0137 Lean Test
    • P0137 Power Enrichment Test
    • P0138 Rich Test
    • P0138 Decel Fuel Cutoff Test
    • P2A00
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0133, P0134, P0140 or P1133
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
  • Conditions for Running the DTC
    • P0133
    • P0134
    • P0140
    • P1133
  • Conditions for Setting the DTC
    • P0133
    • P0134
    • P0140
    • P1133
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0171 or P0172
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Electrical Information Reference
    • Emission System Information Reference
    • Engine Mechanical Information Reference
    • Fuel System Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing For DTC P0171
  • Circuit/System Testing For DTC P0172
  • Repair Procedures
• DTC P0201-P0204
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
    • Special Tools Required
  • Circuit/System Testing
  • Repair Procedures
• DTC P0230
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
    • Special Tools Required
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0300-P0304
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Electrical Information Reference
    • Scan Tool Reference
    • Special Tools Required
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
  • Repair Verification
• DTC P0315
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Scan Tool Reference
  • Circuit/System Testing
  • Repair Procedures
• DTC P0324, P0325, P0326, P0327 or P0328
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
    • DTC P0324
    • DTC P0325
    • DTC P0326
    • DTC P0327 and P0328
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Testing
    • P0324
    • P0325, P0327 and P0328
    • P0326
  • Component Testing
  • Repair Procedures
• DTC P0335
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0336
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Testing
  • Repair Procedures
• DTC P0340, P0341, P0365 or P0366
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC P0340 and P0365
  • Conditions for Running the DTC P0341
    • Near Engine Start, CMP Fast Event Based Test
    • After Engine Start, CMP Slow Event Based Test
  • Conditions for Running the DTC P0366
    • Near Engine Start, CMP Fast Event Based test
    • After Engine Start, CMP Slow Event Based Test
  • Conditions for Setting the DTC P0340
  • Conditions for Setting the DTC P0341
    • Near Engine Start, CMP Fast Event Based test
    • After Engine Start, CMP slow Event Based Test
  • Conditions for Setting the DTC P0365
  • Conditions for Setting the DTC P0366
    • Near Engine Start, CMP Fast Event Based test
    • After Engine Start, CMP Slow Event Based Test
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
  • Repair Verification