Inspection/Maintenance (I/M) System DTC Table
Inspection/Maintenance (I/M) System DTC Table
| System | DTCs Required to Set System Status to YES |
|---|---|
| Catalyst Monitor If an I/M System Status indicator did NOT update to YES during the Inspection/Maintenance (I/M) System Check , review each indicator and reference this table to determine each DTC associated with the I/M System Status Indicator. Each DTC listed below has specific conditions that must be met for the diagnostic to run. Included in these conditions are additional DTCs which, if set, will inhibit these DTCs from running. Reviewing and operating the vehicle within the Conditions for Running for each DTC listed below will allow the I/M System Status Indicators to transition to YES. |
|
| Catalyst | DTC P0420 |
| EVAP | DTC P0442 DTC P0443 or P0449 DTC P0446 DTC P0451, P0452, P0453 or P0454 DTC P0455 DTC P0496 |
| Oxygen Sensor | DTC P0131, P0132, P0137, P0138, P2A00 or P2A01 DTC P0133, P0134, P0140 or P1133 |
| Oxygen Sensor Heater | DTC P0030, P0036, P0053, P0054, P0135 or P0141 |