Removal Procedure
- Remove the instrument panel (I/P) closeout panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
- Carefully cut and remove the tie strap securing the adjustable pedal module to the I/P support beam.
- Remove the adjustable pedal module (1) from the side of the I/P support beam.
- Disconnect the electrical connector from the adjustable pedal module.
Fig 1: Removing/Installing 3 Brake Pedal Assembly To Instrument Panel (I/P) Carrier Bolts Adjustable Pedal Module From Side Of I/P Support Beam