Scan Tool Output Controls
Engine Control Module (ECM)
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| GEN L-Terminal | Engine, Engine Electrical, Special Functions, ECM | The engine control module (ECM) commands the generator OFF when off is selected. The generator will then stop generating an output voltage. |
| Starting Relay Command | Engine, Engine Electrical, Special Functions, ECM | The ECM commands the starter relay On and Off. |
Powertrain Control Module (PCM)
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| GEN L-Terminal | Engine, Engine Electrical, Special Functions, PCM | The powertrain control module (PCM) commands the generator OFF when off is selected. The generator will then stop generating an output voltage. |
Instrument Panel Cluster (IPC)
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Malfunction Indicator Lamp | Body and Accessories, Instrument Panel, Special Function, IPC | The instrument panel cluster (IPC) illuminates MIL to test for an inoperative indicator. The battery indicator is just to the left of the engine indicator. |