Fuel Level Sensor Replacement

FUEL LEVEL SENSOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the modular fuel sender assembly from the fuel tank.




2. Use a flat-bladed driver to assist removal of the fuel level sender assembly harness connector from underneath the modular fuel pump and sender assembly cover.




3. Pry the tang open that holds the fuel sender assembly (1) to the side of the reservoir, then lift it OFF from the reservoir.

INSTALLATION PROCEDURE




1. Install the fuel sender assembly (1) to the side of the reservoir.




2. Install the fuel level sender assembly harness connector to the modular fuel pump and sender assembly cover.
3. Install the modular fuel sender assembly to the fuel tank.