April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: CMP Sensor

GM1578483

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Inspect the CMP sensor for damage, replace as necessary.

Lubricate the CMP sensor O-ring seal with clean engine oil.
Install the CMP sensor.
NOTE: Refer to Fastener Notice .
Install the CMP sensor bolt.
Tighten: Tighten the bolt to 10 N.m (89 lb in).

Fig 2: CMP Sensor Electrical Connector

GM1591857

Courtesy of GENERAL MOTORS CORP.

Connect the intake CMP sensor electrical connector (1).