LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2006 >> Solstice Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Fuel Rail Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Resonator Replacement .
    3. Fig 1: Fuel Injector Inline Electrical Connector
    GM1590626Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the fuel injector inline electrical connector (1).
  4. Disconnect the electronic throttle control (ETC) electrical connector (3).
  5. Remove the 2 engine harness clips (2, 5) from the fuel rail tabs.
    6. Fig 2: Fuel Rail Bolts
    GM1578472Courtesy of GENERAL MOTORS CORP.
  6. Remove the fuel rail bolts.
    7. IMPORTANT: Use care when removing the fuel rail assembly in order to prevent damage to the fuel injectors electrical connector terminals and spray tips.
  7. Pull the fuel rail back and upward in order to release the fuel injectors from the cylinder head ports.
  8. Remove the fuel rail.
  9. Remove the fuel injectors, if necessary. Refer to Fuel Injector Replacement .
scientia non olet · About LEMON Manuals