LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2006 >> Torrent AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Window Replacement - Liftgate >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Liftgate Window
    GM1413128Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Cracked Window Caution in Cautions and Notices.
    IMPORTANT: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  1. Open the liftgate.
  2. Remove the liftgate trim. Refer to Trim Panel Replacement - Liftgate in Body Rear End.
  3. Disconnect the electrical connectors from the liftgate window defogger bus bar.
    4. CAUTION: Refer to Defroster Outlet Caution in Cautions and Notices.
  4. Cover the following parts to protect from broken glass:
    • Upper dash pad
    • Defroster outlets and A/C outlets
    • Seats and carpeting
    5. CAUTION: Refer to Glass and Sheet Metal Handling Caution in Cautions and Notices.
    IMPORTANT: Keep the cutting edge of the tool against the window.
    Fig 2: Removing Liftgate Window From Urethane Adhesive
    GM1326377Courtesy of GENERAL MOTORS CORP.
  5. Remove the liftgate window from the urethane adhesive.
    • Leave a base of urethane approximately 2 mm (0.078 in) on the pinch-weld flange.
    • The only suitable lubrication is clear water.
    • Use J 24402-A  , J 39032  or equivalent in order to remove the window. See Special Tools .
  6. With the aid of an assistant, remove the window from the vehicle.
scientia non olet · About LEMON Manuals