Scan Tool Data Definitions

SCAN TOOL DATA DEFINITIONS

Battery 1: The scan tool displays 0-20 Volts. The scan tool displays the voltage as received on the battery positive voltage circuit of the body control module (BCM).

Crank Request Signal: The scan tool displays Yes/No. The scan tool displays Yes when the powertrain control module (PCM) receives a crank request.

Generator L-Terminal Signal Command: The scan tool displays On/Off. The scan tool displays Off until the engine is running, then the PCM supplies then the percentage value varies depending on electrical loads

Ignition 1 Signal: The scan tool displays 0-20 Volts. The scan tool displays the voltage as received on the Ignition 1 circuit to the PCM.

Starter Relay Command: The scan tool displays On/Off. The scan tool displays Off until the PCM commands the starter relay On.

TR Sw.: The scan tool displays Invalid, Neutral, Drive, Park, Low, Reverse and Intermediate. The scan tool displays the position of the transaxle switch.