Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Radio Antenna Module

Courtesy of GENERAL MOTORS CORP.

Insert the tab on the module to the opening.

Fig 2: View of Radio Antenna Module Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the radio antenna module bolt.
Tighten: Tighten the bolt to 6 N.m (53 lb in).

Fig 3: View of Body Wiring Harness Connector & Radio Antenna Cable

Courtesy of GENERAL MOTORS CORP.

Attach the radio antenna cable.
Attach the body wiring harness connector.
Attach the rear window defog connectors to the glass.
Install the right rear quarter upper trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper in Interior Trim.