LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2007 >> G5 Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System & Engine Traction System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Electronic Brake Control Module (EBCM) & Brake Pressure Modulator Valve (BPMV)
    GM1641120Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition switch to the OFF position.
  2. If equipped with RPO LSJ, remove the throttle body air snorkel.
  3. Clean the electronic brake control module (EBCM) (3) to brake pressure modulator valve (BPMV) (4) area of any accumulated dirt and foreign material.
  4. Remove the 4 EBCM-to-BPMV retaining bolts (2).
  5. Disconnect the electrical connector (1) from the EBCM (3).
    6. IMPORTANT: Do Not use a metal tool to pry the EBCM from the BPMV. Use care to ensure that the EBCM-to-BPMV mating surfaces are not scratched during EBCM removal.
  6. Separate the EBCM (3) from the BPMV (4) by carefully pulling apart.
scientia non olet · About LEMON Manuals