LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2007 >> G6 Base, 2.4 B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Locating Fuel Level Sensor & Electrical Connector
    GM1580741Courtesy of GENERAL MOTORS CORP.
  1. Carefully slide the fuel level sensor (2) into the slots on the fuel pump module bowl.
  2. Secure the retaining tab on the sensor into the slot on the pump module bowl.
  3. Connect the fuel level sensor electrical connector (1) to the pump module cover.
  4. Install the fuel level sensor electrical connector to the molded-in tab on the pump module bowl.
  5. Install the fuel sender. Refer to Fuel Sender Assembly Replacement .
scientia non olet · About LEMON Manuals